Horizontal Centrifugal Monoblock Water Pump

TPW series single stage single suction horizontal end suction monoblock centrifugal pump is the second generation of high efficiency energy saving product designed by our company based on many years of production experience as per the performance parameters stated in the international standard ISO2858 and the national standard JB/T6878.2-93 . It is an ideal substitute for normal pumps like SW pipeline, IS and D multistage centrifugal pumps. This series has a flow range of 1.5m3/h-1600m3/h and a lift head range of 5m-125m, which includes many specifications like basic, diversion and cutting types. According to the differences in working medium and temperature as well as material and structural changes of the flow-through part, it can be designed and manufactured into TPWR hot water pump , TPWH pipeline chemical and YW pipeline oil pump with the same performance parameters. Accordingly, this series can be widely applied to replace the normal centrifugal pump completely to be used in all cases


Working conditions:

1) Suction pressure ≤1.0Mpa , or the maximum working pressure of pump system  ≤1.6Mpa, namely pump suction pressure + pump delivery head  ≤1.6Mpa , pump static test pressure at 2.5Mpa . Please specify the working pressure of the system when placing an order. To acquire working pressure of pump system greater than 1.6Mpa should be specified separately when placing an order for our convenience to use case steel for wetted parts and connection parts in production. 


2) Ambient temperature <40°C , relative humidity  <95% . 


3) Volume content of solid particles in medium to be delivered shouldn't exceed 0.1%  of unit volume, granularity  <0.2mm


Note: to handle medium carrying small particles, please specify when placing an order for our convenience to use wear resistant mechanical seal. 

Hot Tags: centrifugal monoblock water pump, manufacturers, suppliers, factory, brands


Related Products